Cast aluminum vibratory feeder bowl, like other mechanical equipment, may have some minor problems after long-term use. When the feeder has poor feeding, abnormal vibration or excessive noise, how can the root cause of the problem be found quickly and accurately? As long as you master the correct troubleshooting method, the problem can be solved quickly.
What should we do if the cast aluminum vibratory feeder bowl is abnormal during use?
It is recommended to first see if the cast aluminum vibratory feeder bowl can vibrate normally. If the vibration is weak or unresponsive, it may be poor contact with the power supply. Just check the plug and circuit.
Then observe the inside of the aluminum bowl. If any parts are stuck, it may be that there is a foreign body on the feeding track or the angle is not appropriate. Clean up and adjust the angle of the track. Cast aluminum vibratory feeder bowl should be ready for normal use.
If the feeding is uneven, you can take a look at the vibration frequency setting and try to adjust it. You can also check whether the inner wall of the cast aluminum vibratory feeder bowl is worn. If the wear is serious, just change the lining.
The cast aluminum vibratory parts feeder we produce is designed with subsequent troubleshooting and maintenance in mind to be more convenient. The various parts of the cast aluminum vibratory parts feeder are easy to disassemble and assemble, such as the connecting parts of the vibrating motor and the aluminum bowl, which can be disassembled and inspected without complex tools. In addition, the aluminum bowl is made of high-strength aluminum alloy material, which is lightweight, wear-resistant and corrosion-resistant, reducing failures caused by material problems. For different scenarios, our cast aluminum vibratory parts feeder still has many specifications. Suitable models can be found for small electronic parts feeding or medium-sized hardware conveying.
Our company provides customized services. Some customers need cast aluminum vibratory parts feeder to transport special-shaped parts. We will design the internal structure of the aluminum bowl according to the size and weight of the parts to make the feeding smoother. Whether it is to adjust the vibration frequency range or change the capacity of the aluminum bowl, we can produce it according to the specific needs of our customers.
Shenzhen Hongcheng Automation Equipment Co., Ltd. the cast aluminum vibratory parts feeder has been put into use in many domestic factories and has also been exported to many countries. We will continue to optimize product performance to help customers achieve more efficient production. If you encounter any problems in the process of using cast aluminum vibratory parts feeder, or have special customization needs, please feel free to contact us, I believe we can provide you with satisfactory products.